PUMA VTR W-AXIS Series
Vertical Turning Centers
PLENTY OF POWER
With the PUMA VTR with W-axis, your heaviest workpieces are handled with ease. Thanks to it's up to 90 horsepower in a spindle that rotates between 300 and 400 r/min, generating a whole lot of torque. These machines are packed with muscle.
PUMA VTR W-AXIS Lineup
| Main Spindle Std Chuck | 40" |
| Main Spindle Max Chuck | 55" |
| Max Turn Length | 49.2" |
| Max Turn Diameter | 63.0" |
| Guideway Type | Box way |
| X Axis Rapid Traverse | 427 ipm |
| Z Axis Rapid Traverse | 394 ipm |
| Swing Over Bed | 66.9" |
| Spindle Power | 50/60/90 hp |
| Spindle RPM | 400 RPM |
| Spindle Torque | 23,585 ft-lb |
| Tool Mount Type | DMT VTR Base |
| Machine Height | 220" |
| Machine Length | 207" |
| Machine Width | 150.5" |
| Machine Weight | 65,040 lb |
| Main Spindle Std Chuck | 40" |
| Main Spindle Max Chuck | 55" |
| Max Turn Length | 49.2" |
| Max Turn Diameter | 63.0" |
| Guideway Type | Box way |
| X Axis Rapid Traverse | 472 ipm |
| Z Axis Rapid Traverse | 394 ipm |
| Swing Over Bed | 66.9" |
| Spindle Power | 50/60/90 hp |
| Spindle RPM | 400 RPM |
| Spindle Torque | 23,585 ft-lb |
| Spin Axis Contour Torque | 4,720 ft-lb |
| Tool Mount Type | DMT VTR Base |
| Machine Height | 220" |
| Machine Length | 207" |
| Machine Width | 150.5" |
| Machine Weight | 66,140 lb |
| Main Spindle Std Chuck | 55" |
| Main Spindle Max Chuck | 70" |
| Max Turn Length | 70.87" |
| Max Turn Diameter | 78.7" |
| Guideway Type | Box way |
| X Axis Rapid Traverse | 472 ipm |
| Z Axis Rapid Traverse | 394 ipm |
| Swing Over Bed | 82.6" |
| Spindle Power | 50/60/90 hp |
| Spindle RPM | 300 RPM |
| Spindle Torque | 28,302 ft-lb |
| Tool Mount Type | DMT VTR Base |
| Machine Height | 248" |
| Machine Length | 256" |
| Machine Width | 167" |
| Machine Weight | 88,200 lb |
| Main Spindle Std Chuck | 55" |
| Main Spindle Max Chuck | 70" |
| Max Turn Length | 70.87" |
| Max Turn Diameter | 78.7" |
| Guideway Type | Box way |
| X Axis Rapid Traverse | 472 ipm |
| Z Axis Rapid Traverse | 394 ipm |
| Swing Over Bed | 82.6" |
| Spindle Power | 50/60/90 hp |
| Spindle RPM | 300 RPM |
| Spindle Torque | 28,302 ft-lb |
| Spin Axis Contour Torque | 4,720 ft-lb |
| Tool Mount Type | DMT VTR Base |
| Machine Height | 248" |
| Machine Length | 256" |
| Machine Width | 167" |
| Machine Weight | 88,200 lb |
INNOVATIVE TOOL HOLDER
The PUMA VTR W-axis gives you lower center-of-gravity cutting, and the ram tool on the machine can accept the indexing quad tool holder. The holder is equipped with up to four tools that can index in 90-degree increments. It’s an innovative solution, and it slashes cycle time.
W-AXIS FLEXIBILITY
There are two types of VTR machines: fixed cross rail or elevating cross rail. Should you choose elevated cross rail, you can adjust the W-axis height in just a couple steps to work on higher profile parts, or parts where you need to get the cross rail as close as possible.
