SVM Series
Vertical Machining Centers
BANG FOR YOUR BUCK
If performance per dollar is what you’re after in your VMC, you can’t do much better than the SVM Series. We designed this machine to meet the industry’s need for light, high speed cutting, and that’s exactly what you get.
SVM Lineup
SVM4100
- X-Axis Travel 30.3"
- Spindle Taper 40
- Spindle RPM 12,000
See Pricing
SVM4100
MSRP: $80,900
TBA Terms & conditions
MSRP means Manufacturer Suggested Retail Price. Final pricing from distributor may vary. Pricing applies only to machines sold through approved Doosan distributors. Pricing subject to change. Pricing is F.O.B. P.O.E. Pricing not applicable with other promotions.
Machine specifications and standard features shown on website are typical stocking configurations but not guaranteed. Product configuration and availability verified by distributor. By submitting details you agree to be contacted by Doosan Machine Tools America and its distributors who will reach out with additional details pricing. Valid for North and South America only.
| X Axis Travel | 30.3" |
| Y Axis Travel | 16.1" |
| Z Axis Travel | 20.1" |
| X Axis Rapid Traverse | 1,417 ipm |
| Y Axis Rapid Traverse | 1,417 ipm |
| Z Axis Rapid Traverse | 1,417 ipm |
| XYZ Acc/Dec | 0.72 / 0.6 / 0.6G |
| Cutting Feedrate | 1 - 708 ipm |
| Table Length | 36.2" |
| Table Width | 16.1" |
| Maximum Table Capacity | 1,323 lb |
| Number of Tools STD | 30 |
| Spindle Taper | CAT40 BIG-PLUS® |
| Spindle Power | 7.4 / 25 hp |
| Spindle RPM | 12,000 RPM |
| Spindle Torque | 70.5 ft-lb |
| Power Transmission Type | Direct Drive |
| Height | 102.4" |
| Length | 85" |
| Width | 88.6" |
| Weight | 8,487 lb |
| X Axis Travel | 50" |
| Y Axis Travel | 20.1" |
| Z Axis Travel | 20.1" |
| X Axis Rapid Traverse | 1,417 ipm |
| Y Axis Rapid Traverse | 1,417 ipm |
| Z Axis Rapid Traverse | 1,417 ipm |
| XYZ Acc/Dec | 0.56 / 0.49 / 0.6G |
| Cutting Feedrate | 1 - 708 ipm |
| Table Length | 51.96" |
| Table Width | 20.1" |
| Maximum Table Capacity | 1,764 lb |
| Number of Tools STD | 30 |
| Spindle Taper | CAT40 BIG-PLUS® |
| Spindle Power | 7.4 / 25 hp |
| Spindle RPM | 12,000 RPM |
| Spindle Torque | 70.5 ft-lb |
| Power Transmission Type | Direct Drive |
| Height | 105.5" |
| Length | 87" |
| Width | 122" |
| Weight | 14,330 lb |
ALL-IN ON ALUMINUM
The SVM is a perfect fit for aluminum die castings in the automotive and IT industries, and it can handle general purpose, lighter duty machining of steel parts as well. Oh, and it has the largest table capacity in its class.
TIME SAVED, MONEY MADE
The reduced accel/decel times in the X/Y/Z axes and the spindle resulted in optimized performance and shorter cycle times. The SVM will arrive on your floor and instantly start giving you the ROI you’re looking for.
