DNM 5AX Series
5-Axis Machining Centers
YOUR 5-AXIS STARTER KIT
Say hello to the foot in the door.
The first time you machine complex parts in a single setup, you never go back. That’s because the time, money and operator error you save instantly changes the way your shop does business. Sporting high rigidity roller guides for all axes, the DNM 5AX will take you where you want to go.
DNM 5AX Lineup
|Type of 5 Axis||Full 5 / 5 Face|
|X Axis Travel||15.7"|
|Y Axis Travel||17.1"|
|Z Axis Travel||19.7"|
|X Axis Rapid Traverse||1,417 ipm|
|Y Axis Rapid Traverse||1,417 ipm|
|Z Axis Rapid Traverse||1,181 ipm|
|Cutting Feedrate||1 - 590 ipm|
|Rotary Table Diameter||7.87"|
|Maximum Table Capacity||88 lbs|
|Number of Tools STD||30|
|Number of Tools OPT 1||40|
|Number of Tools OPT 2||60|
|Spindle Power||15 / 25 hp|
|Spindle RPM||12,000 RPM|
|Spindle Torque||86 ft-lbs|
|Power Transmission Type||Direct Drive|
Let’s talk trunnion tables.
Right out of the box, the DNM 5AX has a built-in 5-axis trunnion table. Select your rotary table diameter (either 200mm or 350mm) and enjoy maximized productivity. By designing the machine around the trunnion table, your machining area is maximized and any dead space is minimized.
For those who like going fast.
There are currently over 30,000 DNM Series installed all over the world. The reliable vertical machining centers use their versatility and technical prowess to change shops for the better, and that’s the foundation you get in the DNM 5AX Series. Nothing but tried and true productivity.